S.M.A.R.T failure, type 7

debaser · Post by **debaser** » Wed Jun 15, 2005 2:44 pm

Anyone know the actual problem this hard drive error references? Mine crapped out, and I'm wondering if it's worth holding onto the drive until I can get the platters read, or If I should just destroy it in spectacular fashion (which I have the luxery of doing now).

Bigun · Post by **Bigun** » Wed Jun 15, 2005 3:13 pm

Self-Monitoring Analysis and Reporting Tool -> http://www.ariolic.com/activesmart/smar ... -rate.html

Doing some extensive googleling I've found out that SMART monitors the HD's health (temp, spin up time, ect.). I've never heard of it generating an error. There are certain identifiers via hex numbers, but 07 wasn't listed. So I'm assuming SMART has detected something, finding out which error the hex number 7 is associated with would tell you exactly what it is.... which I'm not sure how that can help.. but there you go.

*EDIT*

07 - Seek error rate

debaser · Post by **debaser** » Wed Jun 15, 2005 3:20 pm

Thanks for the info. Now, do you have any idea what seek error rate refers to?

"PC LOAD LETTER, What the fuck does that mean?"

Nephilim · Post by **Nephilim** » Wed Jun 15, 2005 4:02 pm

I would hazard a guess and say that 'seek error rate' refers to the rate at which the drive encounters seek errors when reading data.

If you are getting SMART errors, you're pretty much SOL on that HDD. If you are still able to read from the drive and haven't gotten your data off of it, DO IT ASAP. If you can't read from the drive, then you are hosed and nothing short of sending it off to a VERY expensive data recovery service will get your data back from it.

Long story short:

Mr. Sledgehammer, meet Mr. Hard Drive.

Bigun · Post by **Bigun** » Wed Jun 15, 2005 4:10 pm

Nephilim wrote:Mr. Sledgehammer, meet Mr. Hard Drive.

Do us all a favor and video it and send it to us. I do enjoy a good thrashing.

Hardcoregirl · Post by **Hardcoregirl** » Wed Jun 15, 2005 5:27 pm

debaser wrote:Got me a movie, I want you to know...

..smashing up hard drives, I want you to know

debaser · Post by **debaser** » Wed Jun 15, 2005 11:15 pm

Sledge hammers are strictly for amatures, what I am planning will include about 20 lbs. of C-4 and be felt for miles. I will post video.

Bigun · Post by **Bigun** » Thu Jun 16, 2005 1:20 pm

Sweetness

Nephilim · Post by **Nephilim** » Thu Jun 16, 2005 2:34 pm

I dunno, that seems kind of a waste of 20 lbs. of good C-4.

Save your C-4. Just open the case of the HDD and stuff in as many M80s as you can and then close the case and light it.

junkie christ · Post by **junkie christ** » Thu Jun 16, 2005 2:56 pm

debaser wrote:Sledge hammers are strictly for amatures, what I am planning will include about 20 lbs. of C-4 and be felt for miles. I will post video.

whoa
post video
thats fucking great.

Mercurygriffin · Post by **Mercurygriffin** » Thu Jun 16, 2005 3:40 pm

A word of caution. A quarter sized piece of C-4 can blow up a dumpster. I have always said that there isn't a single problem that can't be fixed with 400 lbs. of C-4, but in this case I would recommend the quarter sized.

Hook it up to the power slot as C-4 ignites from electricity.
Put it in an empty case.
Plug it into a clapper.
Set up your camera 100 ft. + away.
Throw a lit fire cracker at it.

Fire cracker>
clapper>
power>
C-4>

Boom!
:twisted:

debaser · Post by **debaser** » Thu Jun 16, 2005 3:54 pm

Nephilim wrote:I dunno, that seems kind of a waste of 20 lbs. of good C-4.

Save your C-4. Just open the case of the HDD and stuff in as many M80s as you can and then close the case and light it.

We have a plethora, and thats just for starters. Videos and pics will be forthcoming...

S.M.A.R.T failure, type 7

S.M.A.R.T failure, type 7

Re: S.M.A.R.T failure, type 7